These panels are made of an empty lambda overlapping on the next panel, leaving the bolt with a square washer holding on the two ribs.
They may be 3 or 5 ribs, the latter having improved flexural behavior.
The ideal slope should always be greater than 7%.
The self-supporting roof panels without flashing are formed by a sheet of steel on each side and a rigid polyurethane foam core (C-s3-d0). They are designed as an enclosure of sloping roofs with a minimum slope of 7%.
The maximum recommended length for this product is 16,500 mm. with a useful width of 1,000 mm.
Our panels with polyurethane foam core (PUR) have a fire reaction classification (C-s3 d0) according to EN 13501-1.
The fastening system with visible screws allows a quick assembly of the cover without compromising the guarantee of tightness against rainwater
Sandwich panel designed and manufactured especially for industrial or residential decks, that is, we can cover from a garage to a large logistics center, we adapt to their needs at all times.
This panel can say that is the most established in the market model, because its design with a flashing at the junction of each panel, leaving the screws covered with the same, is the most widely accepted by our customers.
The particularity of these panels is that on the inside of the panel, replace the plate by a polyester film which gives it durability.
© DIPPANEL
Distribución de puertas y paneles, S.L.
Avda. de los Dólmenes, 6
41907 - Valencina de la Concepción
(Sevilla)
Teléfono: (+34) 954 436 422
Móvil: (+34) 675 534 289
[email protected]
